The Wireless Fire Alarm system kit remains a critical installation for homes and office buildings in Kenya. Unmanaged fire can cause significant loss of property. This make fire detection and prevention a very crucial undertaking. Over the years fire safety technology have advanced immensely. Today we have the wireless alarm system kits that are equally reliable, efficient, and easy to install.
A wireless fire alarm system kit is a fire detection and alerting technology that functions without the need for elaborate cabling installations. This is because communication between its components rely on wireless technology. Thus, it uses radio frequency (RF) signals to transmit data between the main hub, alarm repeaters and the smoke detectors.
Due to wireless technology, the system operates on battery power. This means the sensors run on rechargeable batteries that require charging once in a while. Even so, by connecting the devices directly to a power source, will reduce the need for regular recharge. In that case, the battery will only work as backup in case of power outage.
Wireless Fire Alarm System Kit components
The system comprises several critical components. These components function together to detect and respond to fire hazards.
- Smoke and Heat Detectors: smoke detectors detect smoke particles in the air which might be an indication to a possibility of a fire incident. Likewise, heat sensors detect abnormal temperature changes which might point to a possible fire situation. These sensors have been designed to send signals to the main hub or the control panel in case of a trigger.
- The main hub, also known as, the Control Panel: the control panel receives signals from sensors (heat sensor and smoke detectors) regular. The signal received will be communicated to establish whether the alarm can be triggered or not.
- Manual Call Points: manual call point operates in a manual fashion by enabling the house residents to activate the alarm during an emergency.
- Alarm Sounders and Strobe Lights: sounders generate audible sounds to alert the people within the house to vacate the building because of fire danger. Equally, strobe lights function in the like manner by warning building tenants of an impending hazard due to fire. All these mainly work to enable timely evacuation in case a detected danger.
- Wireless Repeater Units: The repeaters will simply expand signal coverage to ensure strong connectivity between wireless devices. The signal repeaters can be installed in strategic areas. Hence, communication between various components will remain stable particularly expansive installations.
- Remote management through the app: Many modern wireless alarm systems come with app to allow remote management. So apart from the use of a physical keypad system, an application installed in the smartphone can create convenience for the users at home. Hence, the user can arm and disarm the system remotely from the smartphone.
Advantages of Wireless Devices
This wireless technology solution provides numerous benefits in comparison with the traditional cabled installation.
- Ease of Installation: Unlike cabled installation that require extensive wiring, wireless technology can be installed quickly and easily. Also, no disruption which can be witnessed during cabling installation. No requirement for cabling, has made this solution suitable for buildings where no provision exist for installing cable conduits. see; SIP trunk provider
- Scalability: in case of a future need, adding more sensors and detectors in a wireless setup has proven less cumbersome compared to the cabled installation. Therefore, new requirements can easily be taken care of as the user requirements change.
- Reliability and Redundancy: These systems run on encrypted RF signals that minimize the risk of interference. Moreover, signal loss can be rectified easily through the use repeaters and signal boosters. Still, this solution has built-in redundancy to ensure continuity even when one device within setup loses connection. see; turnstile system
- Cost-Effectiveness: Wireless systems tend to be generally less expensive to install. The wireless fire alarm system kit price in Kenya starts at KES 65,000 for small office work space setup. To start with, the need for cabling installation has been done with. Secondly, due to wireless installation, the labor cost will be lower. This is because of the shorter time to install, configure and deploy the devices.
- Minimal Maintenance requirement: minimal physical connections translate to minimal maintenance requirement. Generally, wireless solutions require less maintenance because fault isolation tend to be faster. On the other hand, problem isolation in a wired setup can take longer which tends to increase maintenance cost.
Wireless Alarm Kit Price In Kenya
| Wireless Alarm system kit and installation | KES 65,000 |
| Power up | direct power connection. Also use of rechargeable batteries |
| Wireless peripherals | smoke detectors, heat sensors, signal repeaters, panic buttons, sirens, keyfobs |
| Remote management | app available for smartphones |
| Integration | CCTV surveillance, Intruder alarm |
| Ideal installation | Office work space, residential homes, warehouse |
| Installation and warranty | yes |
Installation guideline
Getting the most from the battery: to reduce the need for frequent charging, the sensors should be connected to a power source. Therefore, the battery will only serve as a backup in case of power outage. Even so, there should be regular battery replacement so that the system runs minimal interruptions.
see; biometric employee time attendance system
How to reduce signal Interference: RF signals tend to be affected obstructions such as the brick wall and the steel doors. electromagnetic interference can also be a factor. Also, strategic setup location to take care of distance challenges between devices. Be that as it may, proper design installation and proper spacing of signal repeaters can help address most of signal related issues.
see; VoIP PBX system installation
Enable remote connectivity. The wireless alarm systems continue to advance technologically. All these advancements have led to better functionality and improved reliability. The use of app will allow users to receive real-time alerts even when away from home or the office. However, remote connectivity depends on the availability of an internet connection in the house. Therefore, the main hub must remain always connected to the internet at all times.
Maintaining beauty and aesthetics for the customers:
wireless devices have been designed with appealing look and manufactured in different color shades. When properly installed, the sensors might appear as decorative devices in a house by enhancing the general aesthetics on the walls. Also, customers have the option of choosing the preferred color to compliment the interior decoration.
Integration of the wireless technology with the fire safety devices has brought so much benefits for the customers and the installers alike. Bedsides, ease of installation, the solution offer smooth scalability. Additionally, the overall functionality of the solution has been made even more reliable. More importantly, technological advancement has brought about improved fire detection and response.
Contact us today for the best wireless fire alarm kit price in Kenya.